Phosphorescent organic light-emitting devices (PhOLEDs) based on 1-methyl-3-propyl-5-(2,4,5-trifluorophenyl)-1H-1,2,4-triazole as the cyclometalated ligand: Influence of the ancillary ligand on the emissive properties
UV-violet-blue LED induced polymerizations: Specific photoinitiating systems at 365, 385, 395 and 405 nm
Phosphorescent organic light-emitting devices (PhOLEDs) based on heteroleptic bis-cyclometalated complexes using acetylacetonate as the ancillary ligand
Photo-Cross-Linked Diblock Copolymer Micelles: Quantitative Study of Photochemical Efficiency, Micelles Morphologies and their Thermal Behavior
Structural Effects in the Indanedione Skeleton for the Design of Low Intensity 300–500 nm Light Sensitive Initiators.
Separation of Parent Homopolymers from Polystyrene-b-poly(ethylene oxide)-b-polystyrene Triblock Copolymers by Means of Liquid Chromatography: 1. Comparison of Different Methods
Preparation and In Vitro Evaluation of Imiquimod Loaded Polylactide-based Micelles as Potential Vaccine Adjuvants
Wide bandgap iridium complexes varying by their ancillary ligands: Influence on their electroluminescence properties
Water Sensitive Coatings Deposited by Aerosol Assisted Atmospheric Plasma Process: Tailoring the Hydrolysis Rate by the Precursor Chemistry
Visible light sensitive photoinitiating systems: Recent progress in cationic and radical photopolymerization reactions under soft conditions
Up to 100% Improvement in Dynamic Nuclear Polarization Solid-State NMR Sensitivity Enhancement of Polymers by Removing Oxygen
Structure/reactivity/photoinitiation ability relationships in novel benzo pyrazolo (or imidazo) isoquinolinone derivatives upon visible light LEDs
Structure Design of Naphthalimide Derivatives: Toward Versatile Photoinitiators for Near-UV/Visible LEDs, 3D Printing, and Water-Soluble Photoinitiating Systems
Stimuli-responsive behavior of micelles prepared from a poly(vinyl alcohol)-block-poly(acrylic acid)-block-poly(4-vinylpyridine) triblock terpolymer
Specific cationic photoinitiators for near UV and visible LEDs: Iodonium versus ferrocenium structures
Simulation of radical polymerization of methyl methacrylate at room temperature using a tertiary amine/BPO initiating system
Separation of Parent Homopolymers from Poly(ethylene oxide) and Polystyrene Based Block Copolymers by Liquid Chromatography under Limiting Conditions of Desorption-2. Studies of Samples Obtained from ATRP and NMP
Separation of parent homopolymers from poly(ethylene oxide) and polystyrene-based block copolymers by liquid chromatography under limiting conditions of desorption – 1. Determination of the suitable molar mass range and optimization of chromatographic conditions
Panchromatic photoinitiators for radical, cationic and thiol-ene polymerization reactions: A search in the diketopyrrolopyrrole or indigo dye series
On the structure-control relationship of amide-functionalized SG1-based alkoxyamines for nitroxide-mediated polymerization and conjugation
Novel polymer synthesis methodologies using combinations of thermally- and photochemically-induced nitroxide mediated polymerization
Novel panchromatic photopolymerizable matrices: N,N'-dibutylquinacridone as an efficient and versatile photoinitiator
Naphthalimide Derivatives: Substituent Effects on the Photoinitiating Ability in Polymerizations under Near UV, Purple, White and Blue LEDs (385, 395, 405, 455, or 470 nm)
Naphthalimide-Phthalimide Derivative Based Photoinitiating Systems for Polymerization Reactions under Blue Lights
Naphthalic anhydride derivatives: Structural effects on their initiating abilities in radical and/or cationic photopolymerizations under visible light
LED-Induced Polymerization (385, 405, and 455 nm) Using Star-Shaped Tris(4-(thiophen-2-yl)phenyl)amine Derivatives as Light-Harvesting Photoinitiators
Iron Complexes as Photoinitiators for Radical and Cationic Polymerization Through Photoredox Catalysis Processes
Iodonium-Polyoxometalate and Thianthrenium-Polyoxometalate as New One-Component UV Photoinitiators for Radical and Cationic Polymerization
Efficient blue green organic light-emitting devices based on a monofluorinated heteroleptic iridium(III) complex
Elucidation of a side reaction occurring during nitroxide-mediated polymerization of cyclic ketene acetals by tandem mass spectrometric end-group analysis of aliphatic polyesters
Effect of nitroxyl-based radicals on the melt radical grafting of maleic anhydride onto polyethylene in presence of a peroxide
Blue LED Light-Sensitive Benzo Pyrazolo (or Imidazo) Isoquinolinone Derivatives in High-Performance Photoinitiating Systems for Polymerization Reactions
A ring to rule them all: a cyclic ketene acetal comonomer controls the nitroxide-mediated polymerization of methacrylates and confers tunable degradability (vol 51, 12847, 2015)
A ring to rule them all: a cyclic ketene acetal comonomer controls the nitroxide-mediated polymerization of methacrylates and confers tunable degradability
Amino and nitro substituted 2-amino-1H-benzo-[de]isoquinoline-1,3(2H)-diones: as versatile photoinitiators of polymerization from violet-blue LED absorption to a panchromatic behavior
The carbazole-bound ferrocenium salt as a specific cationic photoinitiator upon near-UV and visible LEDs (365-405 nm)
Novel naphthalimide-amine based photoinitiators operating under violet and blue LEDs and usable for various polymerization reactions and synthesis of hydrogels
Iron complexes as potential photocatalysts for controlled radical photopolymerizations: A tool for modifications and patterning of surfaces
A well-defined block copolymer synthesis via living cationic polymerization and nitroxide-mediated polymerization using carboxylic acid-based alkoxyamines as a dual initiator
Aminothiazonaphthalic Anhydride Derivatives as Photoinitiators for Violet/Blue LED-Induced Cationic and Radical Photopolymerizations and 3D-Printing Resins
Venom conjugated polylactide applied as biocompatible material for passive and active immunotherapy against scorpion envenomation
Multidimensional mass spectrometry to characterize degradation products generated during MALDI of polystyrenes prepared by controlled radical polymerization techniques
Visible-Light-Sensitive Photoredox Catalysis by Iron Complexes: Applications in Cationic and Radical Polymerization Reactions
Heteroleptic iridium (III) complexes with three different ligands: Unusual triplet emitters for light-emitting electrochemical cells
Iron-Based Metal-Organic Frameworks (MOF) as Photocatalysts for Radical and Cationic Polymerizations under Near UV and Visible LEDs (385-405 nm)
Iron Complexes in Visible-Light-Sensitive Photoredox Catalysis: Effect of Ligands on Their Photoinitiation Efficiencies
Polymeric Photoinitiators: A New Search toward High Performance Visible Light Photoinitiating Systems
A comprehensive kinetic study of the conventional free-radical polymerization of seven-membered cyclic ketene acetals
Chameleonic Dye Adapts to Various Environments Shining on Macrocycles or Peptide and Polysaccharide Aggregates
A post-polymerization functionalization strategy for the synthesis of sulfonyl (trifluoromethanesulfonyl)imide functionalized (co)polymers
Structural Effects in the Iridium Complex Series: Photoredox Catalysis and Photoinitiation of Polymerization Reactions under Visible Lights
Negative mode MS/MS to read digital information encoded in sequence-defined oligo(urethane)s: A mechanistic study
Photopolymerization processes of thick films and in shadow areas: a review for the access to composites
One-step preparation of surface modified electrospun microfibers as suitable supports for protein immobilization
Azahelicenes as Visible Light Photoinitiators for Cationic and Radical Polymerization: Preparation of Photoluminescent Polymers and Use in High Performance LED Projector 3D Printing Resins
A FrIR/chemometrics approach to characterize the gamma radiation, effects on iodine/epoxy-paint interactions in Nuclear Power Plants
On-surface synthesis of aligned functional nanoribbons monitored by scanning tunnelling microscopy and vibrational spectroscopy
New violet to yellow light sensitive diketo pyrrolo-pyrrole photoinitiators: high performance systems with unusual bleaching properties and solubility in water
Radical Copolymerization of Vinyl Ethers and Cyclic Ketene Acetals as a Versatile Platform to Design Functional Polyesters
Reworkable layered silicate-epoxy nanocomposites: synthesis, thermomechanical properties and combustion behaviour
Copper photoredox catalysts for polymerization upon near UV or visible light: structure/reactivity/efficiency relationships and use in LED projector 3D printing resins
Radical Ring-Opening Polymerization: Scope, Limitations, and Application to (Bio)Degradable Materials
Carbazole Scaffold Based Photoinitiator/Photoredox Catalysts: Toward New High Performance Photoinitiating Systems and Application in LED Projector 3D Printing Resins
Carbazole Derivatives with Thermally Activated Delayed Fluorescence Property as Photoinitiators/Photoredox Catalysts for LED 3D Printing Technology
Synthetic Polymer-based Electrospun Fibers: Biofunctionalization Strategies and Recent Advances in Tissue Engineering, Drug Delivery and Diagnostics
Recent advances on organic blue thermally activated delayed fluorescence (TADF) emitters for organic light-emitting diodes (OLEDs)
HPLC/SM method for the identification and the quantification of illicit substances possibly used as skin whitening agents in bleaching cosmetic products
Organic Light-Emitting Diodes Based on Phthalimide Derivatives: Improvement of the Electroluminescence Properties
Thermally Activated Delayed Fluorescence Emitters for Deep Blue Organic Light Emitting Diodes: A Review of Recent Advances
Comparison of single-ion-conductor block-copolymer electrolytes with Polystyrene-TFSI and Polymethacrylate-TFSI structural blocks
Metal Acetylacetonate-Bidentate Ligand Interaction (MABLI) (Photo)activated Polymerization: Toward High Performance Amine-Free, Peroxide-Free Redox Radical (Photo)initiating Systems
Carbazole-based compounds as photoinitiators for free radical and cationic polymerization upon near visible light illumination
Stable copper acetylacetonate-based oxidizing agents in redox (NIR photoactivated) polymerization: an opportunity for the one pot grafting from approach and an example on a 3D printed object
Electrochromic behavior of drop-casted thin films combining a semi-conducting polymer mixed with a Keggin-type polyoxometalate
Triphenylamine/oxadiazole hybrids differing by the substitution pattern: Influence on the electroluminescence properties of yellow and green emitting diodes
Two New Secreted Proteases Generate a Casein-Derived Antimicrobial Peptide in Bacillus cereus Food Born Isolate Leading to Bacterial Competition in Milk
Elaboration of antimicrobial polymeric materials by dispersion of well-defined amphiphilic methacrylic SG1-based copolymers
